Phottix Laso - Page 30

30
to , is displayed and ash
compensation amount is highlighted.
1.3 Set the ash compensation amount:
Turn<
> to set the ash compensation
amount, and press <
>button.
1.4 ”0.3” indicates 1/3 stops,
and”0.7”indicates 2/3 stops.
1.5 To cancel ash exposure compensation,
return the compensation amount to “±0”.
Note:
1) By setting C.Fn13, you can choose to set
the ash compensation amount by turning
<
> only, without operating function
button 2
.
2) If the camera’s exposure compensation is
set to 1/2-stop increments, ash exposure
compensation will be up to ±stops in 1/2-
stop increments.
2. FEB
With FEB (Flash Exposure Bracketing)
function, you can take three shots while
automatically changing the ash output. The
settable range is up to ±3 stops in 1/3-stop
increments.