Phottix Laso - Page 36

36
2. Autoash Shooting with Thee Slave Groups
You can add ring group C to ring groups A
and B. C is convenient to set lighting so as to
eliminate the subject’s shadow. The setting
A
B
method is the same as “Autoflash Shooting
with Two Slave Groups”.
At the ratio mode
, group
A and B can be set by flash ratio. Group C
is independent with its flash output level
assigned by the camera.
2.1 Set a flash as firing group C: For
the slave unit settings, see the flash’s
instruction manual.
2.2 Press the master unit’s function button
4 to display . Press function button
2 corresponding to to set to <
>.
2.3 Set flash exposure compensation as
required