ManualAVM
TM
2Page 10/24
Safety instructions
3.5 Compliance
European Directives, CE
Directive Standard and/or
measurement
reference
Electromagnetic
Compatibility (EMC)
EN/(IEC) 61000-6-2:2005
EN/(IEC) 61000-6-
4:2007+A1
RoHS2 Directive
(2011/65/EU)
Compliant
UK Legislation, UKCA
UK Legislation Standard and/or
measurement reference
Electromagnetic
Compatibility (EMC)
BS EN/(IEC) 61000-6-
2:2005
BS EN/(IEC) 61000-6-
4:2007+A1
The Restriction of the
Use of Certain
Hazardous
Substances in
Electrical and
Electronic Equipment
Regulations 2012
Compliant
All components of the product are free from silicone.
3.6 Intended use
•
For professional use only.
•
The product shall be used to evacuate air (non-
liquids) from a volume to create vacuum for
gripping, holding and processes.
•
The product can be used to blow air for surface
cleaning and to remove vacuum from a volume.
•
The product can be used to detect and monitor
vacuum.
•
The product shall be used in environments
within the product’s specifications and
certifications.
•
The product shall be installed in accordance to
installation instructions.
•
The product shall be maintained in accordance
to maintenance instructions.
3.7 Misuse
•
Do not use the product for evacuating liquids.
•
Do not use the product for evacuating solid
content without the use of filter.
•
Do not keep the valves activated when the
product is not in operation for a prolonged time.
The seals and lubrication will degrade.
•
Do not install the product in a fully closed
compartment, without ventilation and exhaust
channeling.
•
Do not use the equipment as a stand-alone unit
to fulfill international lifting standards.
•
Do not use the product if the exhaust is
restricted or blocked.
•
Do not use the product if vacuum and exhaust
port are simultaneously blocked when unit is
generating vacuum.
•
Do not use blow-off functions or ejector
exhaust for pressurizing components such as
cylinders and/or tank-volumes.
•
Do not install or use the product if it is
damaged.
•
Do not use the product if the compressed air
line is not properly secured.
•
Do not use compressed air pressure or electrical
voltage outside the specification (operation
voltage +/- 10%).
To Next Page
Loading...
