Fuel injection
9 - 19
9
WITH SERVICE KEYS
3 - Control of information revealed by the control
unit with the system programmed
Connect the diagnosis tester 020460Y - see page 9-17
Set to “ON” and select the immobilizer function.
Visualize the data by scrolling the available pages.
The information given will be as follows:
Blank control unit OFF
Starting inhibited OFF
Number of keys 2*
* The number indicates how many keys have been
entered in the programming including the master key.
2 - Blinking deterrent light
By setting from “ON” to “OFF” when the system is
programmed, the LED gives an intermittent light, as a
deterrent against theft. This occurs with any key that
has been programmed.
When the vehicle is not in use, so as not to eccessively
discharge the battery, the blinking deterrent light stops
automatically after 48 hours. By setting to the positions
“OFF” “ON” “OFF” a new 48 hour cycle begins.
0,7 SEC.
“ON”
LED off
LED on
To Next Page
Loading...
