EasyManua.ls Logo

PIAGGIO Beverly 125 - Automatic Transmission Operation

PIAGGIO Beverly 125
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Push with your foot on the centre stand's fork «F» while lifting the vehicle backward,
holding onto the handlebar.
02_10
SIDE STAND
Push with your foot on the fork of the stand "L" to bring it into the open position while
lifting the scooter at the same time.
CAUTION
TAMPERING MAY CAUSE SERIOUS ENGINE MALFUNCTION.
WARNING
THE SIDE STAND CAUSES THE ENGINE TO TURN ITSELF OFF WHENEVER IT
IS LOWERED.
02_11
Automatic transmission (02_11)
To ensure simple, pleasurable riding, the vehicle is equipped with automatic trans-
mission with regulator and centrifugal clutch. The system is designed to provide the
best performance (acceleration and consumption) while riding on both flat roads and
uphill.
If you have to stop on an uphill slope (traffic lights, traffic jam, etc.) use only the brake
to keep the vehicle still, leaving the engine running at idle speed. Using the
engine to keep the vehicle still can cause the clutch to overheat, due to the
friction of the clutch mechanism itself against the clutch bell.
29
2 Use

Other manuals for PIAGGIO Beverly 125

Related product manuals