EasyManua.ls Logo

PIAGGIO Beverly 125 - Spark Plug Removal and Replacement

PIAGGIO Beverly 125
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TYRES MUST BE REPLACED WHEN THE TREAD REACHES THE WEAR LIMITS
SET FORTH BY LAW.
Characteristic
Tyre pressure (front wheel)
Front wheel: 2.1 bar
Tyre pressure (rear wheel)
Rear wheel: 2.3 bar
Tyre pressure (rear wheel with rider and passenger)
Rear wheel (rider and passenger) 2.5 bar
03_08
Spark plug dismantlement (03_08, 03_09)
Proceed as follows:
1. Remove the spark-plug access door, on the RHS fairing, and use your hand to reach
out for the spark-plug;
2. Detach the spark-plug cap, «A»;
3. Use the supplied box-spanner to loosen the spark-plug;
4. Refit the spark-plug by screwing it in by hand, with the correct inclination;
5. The box-spanner should only be used to tighten the spark-plug;
6. Carefully refit the spark-plug cap, «A».
N.B.
THE USE OF SPARK PLUGS OTHER THAN THE INDICATED TYPE OR OF
SHIELDLESS SPARK PLUG CAPS CAN CAUSE ELECTRICAL SYSTEM FAIL-
URES.
39
3 Maintenance

Other manuals for PIAGGIO Beverly 125

Related product manuals