EasyManua.ls Logo

PIAGGIO Beverly 125 - Brake Fluid Level Check

PIAGGIO Beverly 125
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
TO AVOID THE RISK OF SCALDING, DO NOT UNSCREW THE EXPANSION
TANK COVER WHILE THE ENGINE IS STILL HOT.
WARNING
IN ORDER TO AVOID HARMFUL FLUID LEAKS WHILE RIDING, IT IS IMPORTANT
TO MAKE SURE THAT THE LEVEL NEVER EXCEEDS THE MAXIMUM VALUE.
IN ORDER TO GUARANTEE THE PROPER FUNCTION OF THE ENGINE, IT IS
NECESSARY TO KEEP THE RADIATOR GRILLE CLEAN.
Recommended products
AGIP PERMANENT SPEZIAL
coolant
Monoethylene glycol-based antifreeze fluid, CUNA NC 956-16
03_17
Checking the brake oil level (03_17, 03_18)
The brake fluid tanks of the front and rear brakes are located on the pumps under the
covers on the handlebar. Proceed as follows:
1. Place the scooter on its centre stand and make sure the handlebar is centred;
2. Remove cover "A" by removing the respective retaining screw "B";
3. Check the fluid level through the respective sight glass "C".
A certain lowering of the level is caused by wear on the pads. Should the level appear
to be below the minimum mark, please contact your nearest PIAGGIO Dealer or Au-
44
3 Maintenance

Other manuals for PIAGGIO Beverly 125

Related product manuals