EasyManua.ls Logo

PIAGGIO Beverly 125 - Battery Access and General Maintenance

PIAGGIO Beverly 125
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HYGROSCOPIC, THAT IS, IT ABSORBS HUMIDITY FROM THE SURROUNDING
AIR. IF THE HUMIDITY IN THE BRAKING FLUID EXCEEDS A CERTAIN VALUE,
IT WILL LEAD TO INEFFICIENT BRAKING. NEVER USE BRAKING FLUID KEPT
IN CONTAINERS THAT HAVE ALREADY BEEN OPENED, OR PARTIALLY USED.
Recommended products
AGIP BRAKE 4
Brake fluid
FMVSS DOT 4 Synthetic fluid
03_19
03_20
Battery (03_19, 03_20)
To access the battery, proceed as follows:
1. Place the scooter on its centre stand;
2. Open the saddle, following the procedure described above, see section "Opening
the saddle to reach the helmet compartment";
3. Remove retainers "A" and cover "B".
The battery is the electrical device that requires the most frequent inspections and
diligent maintenance. The main points of maintenance to be observed are as follows:
CAUTION
IN ORDER TO AVOID DAMAGING THE ELECTRICAL SYSTEM, NEVER DISCON-
NECT THE WIRING WHILE THE ENGINE IS RUNNING. DO NOT TIP THE SCOOT-
ER TOO MUCH IN ORDER TO AVOID DANGEROUS LEAKAGE OF BATTERY
ELECTROLYTE
.
46
3 Maintenance

Other manuals for PIAGGIO Beverly 125

Related product manuals