PIAGGIO Beverly 125 User Manual

CAUTION
UPON REPLACING HUB OIL, AVOID THE OIL COMING INTO CONTACT WITH
THE REAR BRAKE DISC.
Recommended products
AGIP ROTRA 80W-90
Rear hub oil
SAE 80W/90 Oil that exceeds the requirements of API GL3 specifications
Characteristic
Rear hub oil
250 cc
03_07
Tyres (03_07)
Check periodically (about every 500 km) the tyre pressure. The tyres are equipped
with wear indicators; the tyres should be replaced as soon as these indicators become
visible on the tyre tread. Also check that the tyres do not show signs of splitting at the
side or irregular tread wear; if this occurs, go to an authorised workshop or at least to
a workshop equipped to perform the replacement.
CAUTION
TYRE PRESSURE SHOULD BE CHECKED WHEN TYRES ARE COLD.INCOR-
RECT TYRE PRESSURE CAUSES ABNORMAL TYRE WEAR AND MAKES RID-
ING DANGEROUS.
38
3 Maintenance

PIAGGIO Beverly 125 Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	124 cc
Cooling System	Liquid cooled
Fuel System	Electronic fuel injection
Transmission	Automatic CVT
Front Suspension	Hydraulic telescopic fork
Seat Height	790 mm
Front Tire	110/70 - 16
Rear Tire	140/70 - 14
Rear Suspension	Dual shock absorbers
Front Brake	Disc
Rear Brake	Disc