Adjusting the Focus according to distance
Place the projector on a flat surface and
toward a wall or a projection screen. The
projectional distance and projectional size are:
Distance: 50 cm ~ 425 cm (20 ” ~ 167 ”)
Image size: 36 cm ~ 305 cm (14 ” ~ 120 ”)
Adjust the focus by turning the focus ring to get a sharp and clear picture.
Note: Use a tripod (not included) to increase the height of the projectional image
when necessary. The tripod socket is located under the projector.
Adjusting the brightness of your projector
There is a brightness adjustment button on the right side of the projector. It allows you
to change the brightness according to the environment and the power consumption.
1) Enhanced: Select this mode when external power supply is available to
maximize the brightness performance.
2) Standard: The default mode for optimizing the projection performance and
battery capacity.
3) Eco: This mode is recommended when the projector is operated under battery
mode to save power.
Note: The projector is automatically switched to Enhanced mode when It’s
powered by the power adapter.
Mode Brightness
Battery Life
(HDMI mode)
Enhanced
Up to 120 lumens 80 mins
Normal
Up to 85 lumens 100 mins
Eco
Up to 60 lumens 120 mins
To Next Page
Loading...
Need help?
General
