Connect the projector to available Wi-Fi network (Home
Network Mode) for Internet access
You are recommended to connect the projector to a Wi-Fi network (home network)
so your computer, tablet, and smartphone can access to Internet at the same time.
You only need to key in the network key to set up the connection for the first time.
The projector will be automatically connected to the network when it’s powered on
the next time.
1. Go to
Setting menu, select and enter ‘Internet’ .
2. Select the Wi-Fi network (SSID) you would like to connect with and confirm with
OK button to open the password dialog and typed the password.
3. If wireless security is enabled on your Wi-Fi network, you should type the
password (network key) by using the virtual keyboard on the smartphone or
your PC keyboard.
To Next Page
Loading...
Need help?
General
