Peer-to-Peer (direct) wireless projection from
computer
Peer-to-peer wireless connection from your computer with the projector allows you
quickly start the presentation or watch a movie wirelessly.
1. Power on the engine and enter to main screen of the projector.
2. Make a note of the Password in 8 digits XXXXXXXX on the top side of main
screen. You will need the information to log in later.
3. Connect your computer to the projector Wireless network by selecting SSID:
Projector-XXXXXXXX on the network list, enter the Password (see Step 2)
and click <OK> to confirm.
4. Double-click EZCast icon on your computer desktop to start the
application.
5. After successfully logged in, the wireless projection between the computer
and the projector has been established.
6. Select the projection output method from Off (default) to Mirror or Extension
to start the wireless projection
To Next Page
Loading...
Need help?
General
