Pidion BM-170 - Setting Connection Environment

BM-170
49
You can set the Wi-Fi wireless Internet.
▶ Settings ▶ Connection
▶ Wi-Fi
You can set the Wi-Fi
environment for access with AP
(Access Points) through
wireless Internet.
Wi-Fi
Setting wireless Internet
1 Select Wi-Fi on the Wireless Manager window.
Then the list of nearby APs is displayed.
2 Select an AP on the wireless networks list, and
select the [Connect] button.
You can set the communication environment with
PC.
If [ActiveSync] is not started when the terminal
is connected with PC normally, you should select
[Enable advanced network functionality].
▶ Settings ▶ Connection
▶ USB to PC
Computers adopting the
tunneling VPN can make a
connection with the terminal
through RNDIS. In this case,
uncheck [Enable advanced
network functionality] before
attempting to connect.
USB to PC
Setting connection environment3