What to do if my PIEPS PRO BT Transceiver shows E2 E3 E4 error?
If your PIEPS Transceiver displays error codes E2, E3, or E4, repeat the self-check in an area free from interference, ensuring you are outdoors and away from electronic, magnetic, and metallic sources of interference. If the error persists, take the device to your retailer.
What to do if my PIEPS PRO BT displays error E9?
If your PIEPS Transceiver shows error E9, retry activating the Bluetooth mode. If the error continues, take the device to your retailer.
General| Frequency | 457 kHz |
|---|---|
| Number of Antennas | 3 |
| Bluetooth | Yes |
| Display | LCD |
| Search Strip Width | 40 m |
| Batteries | 3 x AAA |
| Marking Function | Yes |
| Operating Temperature | -20°C to +45°C |
| Waterproof | Yes |
| Weight (including batteries) | 220 g |
| Battery Life | 200 h |
Outlines general rules for operating the PIEPS beacon safely and responsibilities of the user.
Details critical safety warnings concerning device loss, battery handling, temperature, and Bluetooth use.
Guides on how to switch on the beacon, perform a self-check, and understand the results.
Provides a step-by-step guide for actions to take in an avalanche emergency scenario.
Details how to perform the initial signal search using visual and acoustic cues.
Explains how to follow the directional arrow and adjust search direction for decreasing distance.
Guides on reducing search speed and using cross-like movements for precise location.
Describes the systematic probing technique to pinpoint the exact location of a victim.
Provides solutions for common error codes and operational issues with the PIEPS beacon.
To Next Page
