Pilz PSEN ml b 1.1 - Installation types

Installation
Operating Manual PSEN ml b 1.1/2.1/2.2
1003884-EN-12
| 32
8.2 Installation types
8.2.1 Installation on sliding gate
[1]
[2]
Legend
[1] Safety switch, installed on gate frame
[2]
Actuator with mounting bracket (available as Accessory [ 75]), installed on
sliding gate
1. Install the safety switch with the fixing screws of the safety switch in parallel to the
actuator [ 39] or side-on to actuator [ 39] on the gate frame.
2. Use two M5 screws to fix the actuator to the gate.