Pilz PSEN ml b 1.1 - Installation Without Mounting Plate; Installation with Mounting Plate

Installation
Operating Manual PSEN ml b 1.1/2.1/2.2
1003884-EN-12
| 36
8.3.1 Installation without mounting plate
31
19,2193,54,5
Fixing screws in parallel/side-on to actu-
ator, no mounting plate
Provide the mounting surface with tapped
holes as indicated.
1. Attach the safety switch to the swing gate/sliding gate.
2. Use four M5 screws to fix the safety switch to the mounting surface.
8.3.2 Installation with mounting plate
ø 8,5
Fixing screws in parallel/side-on to actu-
ator, with mounting plate
Provide the mounting surface with tapped
holes as indicated.
1. Attach the mounting plate to the swing gate/sliding gate.
2. Use four M5 screws to fix the safety switch to the mounting plate.