Pilz PSEN ml b 1.1 - Install Fixing Screws Side-On to Actuator; Install Fixing Screws in Parallel to Actuator

Installation
Operating Manual PSEN ml b 1.1/2.1/2.2
1003884-EN-12
| 39
8.4.3 Install fixing screws side-on to actuator
Use four M5 screws to fix the safety switch to the mounting surface.
} Torque setting: Please note the information provided under Technical details [ 65].
[1]
[2]
[3][3]
Fig.: Fixing screws of the safety switch crosswise to actuator
Legend
[1] Front of safety switch
[2] Actuator
[3] Fixing screws of the safety switch crosswise to actuator
8.4.4 Install fixing screws in parallel to actuator
Use four M5 screws to fix the safety switch to the mounting surface.
} Torque setting: Please note the information provided under Technical details [ 65].
X
Y [3]
[3]
[1]
[2]
Fig.: Fixing screws of the safety switch in parallel to actuator
Legend
[1] Safety switch
[2] Actuator
[3] Fixing screws of the safety switch in parallel to actuator