Pilz PSEN opII3H Series - Technical Details Order No. 632020-632022

PSEN opII3H Series
Operating Manual PSEN opII3H Series
1003503-EN-05
| 48
Technical details Order no. 632020-632022
General 632020 632021 632022
Certifications CE, EAC (Eurasian),
KOSHA, TÜV
CE, EAC (Eurasian),
KOSHA, TÜV
CE, EAC (Eurasian),
KOSHA, TÜV
ESPE type 3 3 3
Sensor's mode of opera-
tion Infrared Infrared Infrared
Height of protected field 150 mm 300 mm 450 mm
Resolution
Operating range 0,2 - 18 m 0,2 - 18 m 0,2 - 18 m
Detection capability 30 mm 30 mm 30 mm
Electrical data 632020 632021 632022
Supply voltage
Voltage 24 V 24 V 24 V
Kind DC DC DC
Voltage tolerance -25 %/+20 % -25 %/+20 % -25 %/+20 %
Residual ripple DC 5 % 5 % 5 %
Max. power consumption
OSSD in the OFF state 2,5 W 2,5 W 2,5 W
Max. voltage OSSD in the
OFF state 0,2 V 0,2 V 0,2 V
Max. power consumption
transmitter 1,5 W 1,5 W 1,5 W
Max. inductive load per
output 1 H 1 H 1 H
Beam coding yes yes yes
Optical data 632020 632021 632022
Opening angle -2,5 - 2,5 deg -2,5 - 2,5 deg -2,5 - 2,5 deg
Used wavelength range 850 nm 850 nm 850 nm
Semiconductor outputs 632020 632021 632022
OSSD safety outputs 2 2 2
Switching current per out-
put 100 mA 100 mA 100 mA
Residual current at "0"
signal 0,1 mA 0,1 mA 0,1 mA
Voltage drop at OSSDs 1,5 V 1,5 V 1,5 V
Max. line capacitance at
the outputs without load 40 nF 40 nF 40 nF
Times 632020 632021 632022
Test pulse duration, safety
outputs 300 µs 300 µs 300 µs
Supply interruption before
de-energisation 600 µs 600 µs 600 µs
Response time t1 5,2 ms 5,9 ms 6,5 ms
Response time (with
beam coding) 11,7 ms 11,7 ms 11,7 ms