Pilz PSEN opII3H Series - Introduction; Definition of Symbols

PSEN opII3H Series
Operating Manual PSEN opII3H Series
1003503-EN-05
| 6
INFORMATION
This gives advice on applications and provides information on special fea-
tures.
Overview
Safety light curtains of the PSEN opII3H Series are electrosensitive protective equipment
(ESPE type 3) in accordance with DIN EN 61496-1 for work areas in which machines, ro-
bots, and automated systems could endanger the physical integrity of operators.
Unit features
} Resolution: 30 mm
} Infrared protected field is generated
} LED indicator for status information
} Optical synchronisation of transmitters and receivers
} Beam coding A and B for greater insensitivity (see Installing several safety light curtains
in parallel [ 22])
– to stray light and short-term interruptions of the protected field
– to mutual interference when using two safety light curtains with the same alignment
} Connection to evaluation devices
– PDP67 ION and PDP67 ION HP: 5-pin M12 two-sided connector (see Order refer-
ence for accessories, connection to PDP67 [ 60])
– all other suitable evaluation devices (see System connection [ 34]): 5-pin M12
one-sided connector and open cable end connection to clamping sleeves (see Order
reference for accessories, connection to other evaluation devices [ 61])
} Aluminium alloy housing
} Die-cast zinc end caps
} Shock resistance
– Bracket Swivel-Mount: 10g
– Bracket Adv Bracket Kit: 50g
} Front panel of PC
} Standard installation kit with flexible bracket (swivel mount) (included in delivery) to hold
the transmitter/receiver
– For standard application
– Transmitter/receiver remains rotatable for proper orientation
} Dead-zone-free safety light curtain installation [ 24] with the
PSENopIIAdvBracketKit (available as an accessory [ 59]) as a bracket for a trans-
mitter/receiver
– Dead-zone-free on both sides for protected field height of 300 mm or more
– Dead-zone-free on one side for protected field height of 150 mm