Pilz PSEN opII3H Series - Maintenance

PSEN opII3H Series
Operating Manual PSEN opII3H Series
1003503-EN-05
| 52
Mechanical data 632023 632024 632025
Min. bending radius (mov-
ing) K1 10 x Ø 10 x Ø 10 x Ø
Connection type
Receiver
M12, 5-pin male con-
nector
M12, 5-pin male con-
nector
M12, 5-pin male con-
nector
Transmitter M12, 5-pin male con-
nector
M12, 5-pin male con-
nector
M12, 5-pin male con-
nector
Max. cable length 50 m 50 m 50 m
Material
Housing Aluminium Aluminium Aluminium
End caps Zn Zn Zn
Front screen PC PC PC
Max. torque setting
Clamping screw 1,1 Nm 1,1 Nm 1,1 Nm
Installation screw 3 Nm 3 Nm 3 Nm
Fixing screw 0,7 Nm 0,7 Nm 0,7 Nm
Dimensions
Height 604 mm 754 mm 904 mm
Width 35 mm 35 mm 35 mm
Depth 40 mm 40 mm 40 mm
Weight 1.820 g 2.225 g 2.630 g
Where standards are undated, the 2015-12 latest editions shall apply.
Technical details Order no. 632026-632028
General 632026 632027 632028
Certifications CE, EAC (Eurasian),
KOSHA, TÜV
CE, EAC (Eurasian),
KOSHA, TÜV
CE, EAC (Eurasian),
KOSHA, TÜV
ESPE type 3 3 3
Sensor's mode of opera-
tion Infrared Infrared Infrared
Height of protected field 1.050 mm 1.200 mm 1.350 mm
Resolution
Operating range 0,2 - 18 m 0,2 - 18 m 0,2 - 18 m
Detection capability 30 mm 30 mm 30 mm
Electrical data 632026 632027 632028
Supply voltage
Voltage 24 V 24 V 24 V
Kind DC DC DC
Voltage tolerance -25 %/+20 % -25 %/+20 % -25 %/+20 %
Residual ripple DC 5 % 5 % 5 %
Max. power consumption
OSSD in the OFF state 2,5 W 2,5 W 2,5 W
Max. voltage OSSD in the
OFF state 0,2 V 0,2 V 0,2 V