Pilz PSEN opII3H Series - Dimensions

PSEN opII3H Series
Operating Manual PSEN opII3H Series
1003503-EN-05
| 53
Electrical data 632026 632027 632028
Max. power consumption
transmitter 1,5 W 1,5 W 1,5 W
Max. inductive load per
output 1 H 1 H 1 H
Beam coding yes yes yes
Optical data 632026 632027 632028
Opening angle -2,5 - 2,5 deg -2,5 - 2,5 deg -2,5 - 2,5 deg
Used wavelength range 850 nm 850 nm 850 nm
Semiconductor outputs 632026 632027 632028
OSSD safety outputs 2 2 2
Switching current per out-
put 100 mA 100 mA 100 mA
Residual current at "0"
signal 0,1 mA 0,1 mA 0,1 mA
Voltage drop at OSSDs 1,5 V 1,5 V 1,5 V
Max. line capacitance at
the outputs without load 40 nF 40 nF 40 nF
Times 632026 632027 632028
Test pulse duration, safety
outputs 300 µs 300 µs 300 µs
Supply interruption before
de-energisation 600 µs 600 µs 600 µs
Response time t1 9,1 ms 9,7 ms 10,4 ms
Response time (with
beam coding) 22,3 ms 22,3 ms 22,3 ms
Environmental data 632026 632027 632028
Ambient temperature
Temperature range -10 - 60 °C -10 - 60 °C -10 - 60 °C
Storage temperature
Temperature range -25 - 70 °C -25 - 70 °C -25 - 70 °C
Climatic suitability
Humidity 95 % r. h. at 50 °C 95 % r. h. at 50 °C 95 % r. h. at 50 °C
Condensation during op-
eration Not permitted Not permitted Not permitted
EMC EN 61496-1 EN 61496-1 EN 61496-1
Vibration
In accordance with the
standard EN 60068-2-6 EN 60068-2-6 EN 60068-2-6
Frequency 10 - 150 Hz 10 - 150 Hz 10 - 150 Hz
Amplitude 0,75 mm 0,75 mm 0,75 mm