Pilz PSEN opII3H Series - Page 54

PSEN opII3H Series
Operating Manual PSEN opII3H Series
1003503-EN-05
| 54
Environmental data 632026 632027 632028
Shock stress
In accordance with the
standard EN 60068-2-27 EN 60068-2-27 EN 60068-2-27
Number of shocks 1000 1000 1000
Acceleration 10g 10g 10g
Duration 16 ms 16 ms 16 ms
Bracket Swivel-Mount Swivel-Mount Swivel-Mount
In accordance with the
standard EN 60068-2-27 EN 60068-2-27 EN 60068-2-27
Number of shocks 3 3 3
Acceleration 50g 50g 50g
Duration 11 ms 11 ms 11 ms
Bracket Adv Bracket Kit Adv Bracket Kit Adv Bracket Kit
Protection type
Housing IP65 IP65 IP65
Mechanical data 632026 632027 632028
Min. bending radius (fixed
permanently) K1 5 x Ø 5 x Ø 5 x Ø
Min. bending radius (mov-
ing) K1 10 x Ø 10 x Ø 10 x Ø
Connection type
Receiver
M12, 5-pin male con-
nector
M12, 5-pin male con-
nector
M12, 5-pin male con-
nector
Transmitter M12, 5-pin male con-
nector
M12, 5-pin male con-
nector
M12, 5-pin male con-
nector
Max. cable length 50 m 50 m 50 m
Material
Housing Aluminium Aluminium Aluminium
End caps Zn Zn Zn
Front screen PC PC PC
Max. torque setting
Clamping screw 1,1 Nm 1,1 Nm 1,1 Nm
Installation screw 3 Nm 3 Nm 3 Nm
Fixing screw 0,7 Nm 0,7 Nm 0,7 Nm
Dimensions
Height 1.054 mm 1.204 mm 1.354 mm
Width 35 mm 35 mm 35 mm
Depth 40 mm 40 mm 40 mm
Weight 3.035 g 3.440 g 3.845 g
Where standards are undated, the 2015-12 latest editions shall apply.