Pioneer DEH-P310 - Using the aux Source; Selecting the aux Source; AUX Title Input

Using the AUX Source
It is possible to use auxiliary (AUX) equipment with this product.
To listen to auxiliary equipment, switch the AUX Mode in the Initial Setting Menu ON,
and then select the desired source.
Selecting the AUX Source
• Select AUX. (Refer to page 8.)
AUX Title Input
The display title for AUX Source can be changed.
1. Select the Aux Title Input mode (TITLE IN) in the Detailed Setting Menu.
2. Input the Aux Title.
Refer to “Disc Title Input” on page 23, and perform procedures 3 to 5 in the same way.
Hold for 2 seconds
Each press changes the Source ...
42
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS