Pioneer KRP-500P - 5.7 OUTLINE OF RS-232 C COMMAND

70
KRP-500P
1
2 3 4
A
B
C
D
E
F
1
2 3 4
5.7 OUTLINE OF RS-232C COMMAND
[1] PREPARED TOOLS
[2] USING RS-232C COMMANDS
Issue the SYSS00 command to set the unit to Standalone Operation mode.
It is necessary to prepare the following one to use 232C command.
• PC
• Application for control
• 232C cable (straight)
∗ The setting of the Com port cannot be communicated if it doesn't do correctly.
(Please follow a set explanation of PC in the Com port)