Pioneer PDP-425CMX

134
Menu Mode
4) MPEG NR Setting
This is set when the noise (mosquito noise) of the video such as in a digital broadcast or DVD is disturbing.
The setting should be performed for each input (INPUT1 to INPUT5) and each signal.
Settable condition: When there is video signal input
Factory setting: LOW
1 Select ‘SETUP’.
2 Place the cursor over ‘MPEG NR’ then press the [SET]
button.
3 Each time a [2/3] button is pressed, the setting changes
as shown below.
MENU INPUT1
ENTER
SET
EXIT
MENU
SCREEN SETUP OPTIONPICTURE
:DISABLE
:MIDDLE
COLOR TEMP. :MIDDLE
AUTO POWER OFF
DNR
:LOW
:ON
MPEG NR
CTI
:OFF
:RGB
PURECINEMA
COLOR DECODING
:AUTOCOLOR SYSTEM
SIGNAL FORMAT
Screen 2
:
MPEG NR LOW
SET
SET
EXIT
MENU
Screen 3
3 OFF 2
3 HIGH 2 3 MIDDLE 2 3 LOW 2