Pioneer PDP-5050SX - Page 30

09 Tuner Setup
30
En
Clearing the password
Use the following procedure to clear the password.
1
Press HOME MENU.
2
Select “Tuner Setup”. ( / then ENTER)
3
Select “Parental Control”. ( / then ENTER)
4
Select “Password”. ( / then ENTER)
5
Select “Clear Password”. ( / then ENTER)
Parental Control
Password
Change Password
Password
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Clear Password
Exit
Home Menu
6
Enter the current 4-digit password, using buttons 0 – 9.
• A confirmation screen appears.
7
Press A.
8
Press HOME MENU to exit the menu.
• The above procedure will reset the password to the factory default
(1234).
Activating the Parental Control
1
Press HOME MENU.
2
Select “Tuner Setup”. ( / then ENTER)
3
Select “Parental Control”. ( / then ENTER)
4
Select “Status”. ( / then ENTER)
5
Select “On”. ( / then ENTER)
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9.
6
Press HOME MENU to exit the menu.
• If you select “Off” in step 5, then select “Reset on Startup” or “Don’t
Reset”. With “Reset on Startup” selected, the Parental Control is
automatically activated when the power to the Plasma Display is
turned off and on. With “Don’t Reset” selected, the Parental Control
remains off when the power to the Plasma Display is off and on.
Setting the voluntary movie rating system
(MPAA)
1
Press HOME MENU.
2
Select “Tuner Setup”. ( / then ENTER)
3
Select “Parental Control”. ( / then ENTER)
4
Select “MPAA Ratings”. ( / then ENTER)
5
Select the desired rating and change the setting. ( /
then ENTER)
Parental Control
MPAA Ratings
G
MPAA Ratings
Blocked MPAA Ratings
G, PG, PG-13, R, NC-17, Adult, NR
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
PG
PG-13
Exit
Home Menu
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9.
• Each time you press ENTER, the setting is switched.
• A lock icon appears beside the blocked rating.
• All the ratings have been unblocked before shipment.
6
Press HOME MENU to exit the menu.
• Blocking a rating causes more severe ratings to be automatically
blocked as well. Likewise, unblocking a rating causes less severe
ratings to be automatically unblocked.
We suggest you write down your password so you don’t forget it.
PDP-5050SX/PDP-4350SX
Your password No.:
If you forget the password
When the message “Enter your Password” is displayed in
step 6 under “Clearing the password”, press the ENTER
button on the remote control unit and hold it down for 3
seconds or longer.
The password reverts to “1234”.
09-PDP5050SX-Eng (27-35) 05.2.25, 10:15 AM30