Pioneer PDP-5050SX - VCR Control Buttons

12Useful Remote Control Features
English
51
En
1
2
3
4
5
6
7
8
VCR control buttons
When the VCR is preset by the learning function of the remote
control, the remote control unit buttons will function as follows
when the Mode switch of the remote control unit is set to
VCR.
• When the input selector button having the same number as
the input terminal connecting the VCR is pressed, the VCR
can be operated using 1 to 8.
• VCR made by other manufacturers and not preset can also
be operated using the remote control unit if 1 to 8 have
learned the functions. See page 46.
1 CH +/–
Press to select the channel of the TV tuner on the VCR.
2  (PLAY)
Selects playback.
3  (REW)
Rewinds the tape and allows picture search.
4 SOURCE
Turns the power of the VCR on and off.
5  (PAUSE/STILL)
Sets pauses and still pictures.
6  (FF)
Rapidly advances the tape and allows picture search.
7  (REC)
Starts recording.
8  (STOP)
Stop tape transport.
• The color-highlighted buttons on the remote control can learn the
control signal from another device’s remote control.
Mode switch
(with “VCR”
selected)
12-PDP5050SX-Eng (46-52) 05.2.25, 11:02 AM51