Piper Arrow IV Turbo User Manual

LIST OF ILLUSTRATIONS (cont)
FIGURE NO. SUBJECT GRID NO.
ELECTRICAL SCHEMATICS
—NOTE—
Refer to Grid 313 for Electrical Schematic Index.
95-1. Tire Balancer Fixture 3K4
95-2. Control Surface Balancing Tool 3K5
95-3. Ignition Harness Ferrule Seating Tool 3K6
95-4. Needle 3K6
95-5. Assembly Tool for Ignition Harness Insulating
Sleeve Installation 3K6
95-6. Charging Stand 3K7
95-7. York Compressor and Fabricated Oil Dipstick
(PA-28RT-201) 3K7
95-8. Fabricated Gear Back-Up Extender Actuator
Aligning Tool 3K8
95-9. Fabricated Stabilator Rigging Tool 3K9
95-10. Fabricated Aileron and Flap Rigging Tool 3K10
95-11. Fabricated Aileron Bellcrank Rigging Tool 3K11
95-12. Fabricated Rudder Rigging Tool 3K11
95-13. Fabricated Tool for Baggage Door Lock 3K12
95-14. Retainer Ring Tool 3K12
95-15. Orifice Replacement Tool 3K13
Introduction
Page-14
Revised: July 13, 1983
3A15
PIPER AIRCRAFT
PA-28RT-201 / 201T
MAINTENANCE MANUAL

Piper Arrow IV Turbo Specifications

General

Manufacturer	Piper Aircraft
Model	Arrow IV Turbo
Horsepower	200 hp
Seating Capacity	4
Landing Gear	Retractable tricycle
Range	773 nautical miles
Service Ceiling	20, 000 ft
Fuel Capacity	72 gallons
Propeller	2-blade constant speed
Max Takeoff Weight	2, 900 lb (1, 315 kg)
Stall Speed (Flaps Down)	55 knots
Rate of Climb	1, 000 ft/min