Name: Piper Arrow IV Turbo
Brand: Piper
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Figure 74-44. Removing Spark Plug Frozen to Bushing

SPARK PLUGS.

REMOVAL OF SPARK PLUGS.

1. Loosen the coupling nut on the harness lead and remove the terminal insulator from the spark plug

barrel well.

—NOTE—

When withdrawing the ignition cable lead connection from the

plug, care must be taken to pull the lead straight out and in line

with the center line of the plug barrel; otherwise a side load will

be applied, which frequently results in damage to the barrel

insulator and connector. If the lead cannot be removed easily in

this manner, the resisting contact between the neoprene collar

and the barrel insulator will be broken by a rotary twisting of the

c o l l a r. Avoid undue distortion of the collar and possible side

loading of the barrel insulator.

Effectivity 74-22-01

PA-28RT-201 Page 74-37

December 1, 1978

3E22

PIPER AIRCRAFT

PA-28RT-201 / 201T

MAINTENANCE MANUAL

Questions and Answers:

Need help?

Do you have a question about the Piper Arrow IV Turbo and is the answer not in the manual?

Piper Arrow IV Turbo Specifications

General