9
2.
MOUNTING THE LEGS TO LOWER
SMOKER CABINET ASSEMBLY
Parts Required:
1 x Lower Smoker Cabinet with
Control Panel Assembly (#9)
1 x Right Front Leg (#16)
1 x Left Front Leg (#18)
1 x Right Rear Leg (#15)
1 x Left Rear Leg (#17)
12 x 1/4-20*1/2”Screw (#B)
Installation:
• Lay the Lower Smoker Cabinet with Control
Panel Assembly on up side down on the
cardboard as Fig.2 shown.
• Mount Right Front Leg (#16),Left Front Leg
(#18), Right Rear Leg (#15) and Left Rear
Leg (#17) to the Lower Smoker Cabinet with
Control Panel Assembly (#9) using 12
x1/4-20*1/2”Screws (#B)as Fig.2 shown,
tighten inside screws only, but do not tighten
all outside screws yet as Fig.2 shown below.
Fig.2
3.
MOUNTING BOTH FRONT LEGS TO
LOWER CABINET WITH CONTROL
PANEL ASSEMBLY
Parts Required:
1 x Lower Smoker Cabinet with Control
Panel Assembly (#9)
1 x Right Front Leg (#16)
1 x Left Front Leg (#18)
2 x #10-24*1/2”Screw (#C)
Installation:
• Loosen 2~3 turns on 2 screws as Fig.
3 shown, which were pre-assembled on
the Control Panel to Cabinet before,
mount Right Front Leg (#16) and Left
Front Leg (#18) to the Control Panel
Assembly (#9) using 2 x #10-24*1/2”
Screws (#C) and re-tighten 2 screws on
the Control Panel to the bottom of
Cabinet as Fig.3 shown.
Fig.3
Outside screws
Inside
s
crews
---
--
-----
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
---
-
--
-
--
-
-
--
-
-
-
---
-
-
Loosen 2~3 turns on 2 pre-
assembled screws as Fig. 3
s
hown
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
---
-
-
-
---
----
--
-
----
-
#17 --------
#18
#
16
#
15
--
--
--
-
-
--
---
-
---
--
-
-
-
-
-
#9
-
-
--
-
-
--
-
-
-
To Next Page
Loading...
