Page 27 of 37
8040 Internal IP Comm IO Socket Connect Error
8044 Internal IP Comm IO Socket Write Error
8048 Internal IP Comm IO Socket Read Error
8052 Internal Buffer Manager Logic Error
8056 Internal FIFO push error in the push media of Media Object Collection
8060 Internal Get Next Error in the push media of Media Object Collection
8064 Internal Rendering Engine Logic Error
8068 Internal Rendering Engine Bad Image Error
8072 Newport Thread Fail to Acknowledge
8076 Internal IP Comm Errors Data Server
8077 Internal IP Comm Errors Command Server
8078 Internal IP Comm Errors Ctrl Panel Protocol Glossary
8.3 Fixed Head Power-Up Errors
The firmware at power up determines and reports the following messages on the LCD. Since it occurs at
power up we cannot support non-English language.
ID Text Corrective Action
01 Bad OS Version Check all cables
Attempt Firmware flash
Replace main board
02 Bad FPGA Version Check all cables
Attempt Firmware flash
Replace main board
03 Language File Error Check all cables
Attempt Firmware flash
Replace main board
05 No J33/Transport Sensor Cable Check all cables
Replace Transport sensor
11 Newport Board 1 Not Present Check all cables
Replace Newport board 1
12 Newport Board 2 Not Present Check all cables
Replace Newport board 2
13 Newport Board 3 Not Present Check all cables
Replace Newport board 3
14 Newport Board 4 Not Present Check all cables
Replace Newport board 4
15 Newport Board 5 Not Present Check all cables
Replace Newport board 5
16 Newport Board 6 Not Present Check all cables
Replace Newport board 6
9. Process Maps
9.1 Adjusting Feed Gap (Fixed)
1. With printer OFF LINE, enter the Setup Menu by pressing and holding the MENU button.
To Next Page
Loading...
