9. Complete any optional fields, such as:
l Description - Enter a description of the account up to 150
characters.
l Password - Tap Password to create a password for an
account.
o
Passwords are case sensitive, can be alphanumeric, and
must be four characters in length. You must enter this
password to edit or feed mail against the account once
enabled.
10. Ensure you set the status to active.
11. Tap anywhere on the screen, but outside of the fields when
complete.
12. Tap OK to save. The name of the new account appears.
l Tap Create New Account to create another account.
l Tap Add a Sub Account to this account to add a sub account
to the account you just created.
l Tap Done if you do not need to create any more accounts.
13. Press the back-arrow to return to the account list.
Refilling postage on your device
Your device uses two separate postage accounts, one for shipping
labels and one for envelope printing. The funds for one cannot be used
for the other.
Before you begin:
Make sure that your device is connected to the internet.
l If you have a wired network connection, you will see the following
connection icon in the toolbar:
l If you have a wireless connection, you will see the following
connection icon in the toolbar:
If you see a line through the connection icon, it means that you are not
connected and will not be able to refill your postage until you establish
a network connection.
Refilling envelope printing postage
To refill your envelope printing postage:
1. Tap Envelope Printing or Print on Envelopes on the Home
screen.
2. Tap Postage Balance.
3. Tap Refill Postage.
4. Enter the amount of postage you wish to add.
5. Tap Refill Mail Postage.
6. If you wish to view or print a receipt, tap View Receipt.
7. Tap Done.
8. Your updated postage balance is displayed on the Envelope Printing
or Print on Envelopes screen.
Refilling shipping label postage
To refill your shipping labels postage account:
Pitney Bowes Quick ReferenceGuide December 08,2020 Page 11 of 18
To Next Page
Loading...
