Pixsys ATR 171 - Electrical connections - Output types; SSR output connections; mA;Volt output connections; Digital input connections

User manual - ATR171 13
5.1.g SSR output
SSR
10
11
SSR Command output 12 V / 30 mA.
To use SSR output it is necessary to set
channel 1 of DIP2 as indicated in the figure.
5.1.h Output mA / Volt (only for ATR171-23ABC-T)
10
11
mA
Analogue output in mA configurable as command (Par.
c.out
) or retransmission of process-setpoint (Par.
re t r.
).
To use SSR output it is necessary to set
channel 1 of DIP2 as indicated in the figure.
10
11
V
Analogue output in Volt configurable as command
(Par.
c.out
) or retransmission of process-setpoint (Par.
re t r.
).
To use SSR output it is necessary to set
channel 1 of DIP2 as indicated in the figure.
5.1.i Digital Input (only for ATR171-11/12/14-ABC)
12
13
+Vdc
DI
Digital Input (Par.
d Gt.i .
).