Pixsys TCT101-1ABC - Edit Parameter Configuration

14 - TCT101-1ABC - User manual
8.2 Edit parameter configuration
For configuration parameters see parameter 9.
Press Display Do
1
! for 3 s.
Display 1 shows
0000
and 1st digit flashes,
Display 2 shows
pass.
2
§ or ¶
Modify flashing
digit, press | to
reach the following
digit
Enter password:
1234
3
| for
confirm
Display shows first
parameter of Fu n c
configuration table.
4
§ or ¶
Scroll the
parameters
5
| + § or ¶
Increase or decrease
value on display by
pressing | and one
of the arrow keys at
same time
Enter new data
which will be stored
releasing the keys.
To modify another
parameter, back to
step 4.
6
!
End of configuration,
the device exits
programming mode.