RS232 Codes
Planar RPS and Video Controller RS232 User Guide Page | 10
020-1332-00I
RS232 Codes
Notes:
• The examples are written with the command first and the response in italics.
Example:
• Command: IPV4.ADDRESS(STATIC)=192.168.0.12
• Response: IPV4.ADDRESS(STATIC):192.168.0.12
• In many instances, a modifier may be omitted and the display will replace it
with a default value. For example, the default modifier for the IPV4.ADDRESS
command is STATIC, so the following two commands are identical:
• IPV4.ADDRESS(STATIC)=192.168.0.12
• IPV4.ADDRESS=192.168.0.12
• ‘!’ in the Operators column indicates that the command accepts the execute
operator, which uses no operator symbol. The ‘!’ symbol is not included in the
command.
To Next Page
Loading...
