Planar RPS - Advanced

RS232 Codes
Planar RPS and Video Controller RS232 User Guide Page | 11
020-1332-00I
Advanced
Command Description
Numeric Command Code
Operators
Modifiers Operands Example Notes
Standalone Component Command
Firmware Version Active
Functional in Fast Start Standby
Functional in Low Power Standby
ALERT.CHECK Check Alert
Status
2326 ! ALERT.CHECK
ALERT.CHECK@ACK
Clears existing alerts and evaluates the
system for alerts that are may be active.
Resends alerts based on the alert settings
report via check boxes.
No 6.0 Yes No
ALERT.CLEAR Clear Alerts 2323 ! 0=ALL
1=WEB
2=EMAIL
3=SNMP
ALERT.CLEAR(WEB)
ALERT.CLEAR(WEB):@ACK
ALERT.CLEAR
ALERT.CLEAR:@ACK
Clears alerts for the specified UI. If no
modifier is provided, all alerts are cleared.
Yes 5.1 Yes Yes
DEVICE.REBOOT Unit Connected
Reboot
2405 ! Blank
VC#
PS#
PSW#
DEVICE.REBOOT(PS2)
DEVICE.REBOOT(PS2)@ACK
Reboots the specified device. No modifier
reboots all LAN connected components.
For all device reboot, see SYSTEM.REBOOT.
Yes 2. 1
10.0
1
Yes No
HELP Help 2300 =? 0 = FIRST
2147483647 = NEXT
String HELP=OSD.STATUS
HELP:"OSD.STATUS\
Numeric Value: 1308\
Operators: ?\
No Modifiers\
1 Operand(s)\
Operand #1: Unsigned Integer\
DISABLE 0\
ENABLE 1\
OFF 0\
ON 1\
NO 0\
YES 1\
FALSE 0\
TRUE 1\
Displays information for each command.
To get a list of all commands, first enter the
following command: HELP(FIRST)?
Then enter the following command
continuously until it returns NAK:
HELP(NEXT)?
Yes 1.x Yes Yes