Planar RPS - Security

RS232 Codes
Planar RPS and Video Controller RS232 User Guide Page | 29
020-1332-00I
Security
Command Description
Numeric Command Code
Operators
Modifiers Operands Example Notes
Standalone Component Command
Firmware Version Active
Functional in Fast Start Standby
Functional in Low Power Standby
COMMAND.
ENABLE
Enable TCP/UDP 2411 =? 0=NETWORK 0=DISABLE=OFF=NO=
FALSE
1=ENABLE=ON=YES=
TRUE
COMMAND.ENABLE(NETWORK)?
COMMAND.ENABLE(NETWORK):TRUE
Gets / sets port 57 on the TCP/UDP port to
enabled or disabled.
No 7.0 Ye s Yes
PASSWORD.SET Set User
Password
2410 = String String PASSWORD.SET=123
PASSWORD.SET="123"
Sets the password for the 'admin' account
in the WallDirector software. Command
many not be set via port 57 service.
Yes 7. 0 Ye s Ye s