Planar RPS - Monitoring Setup

RS232 Codes
Planar RPS and Video Controller RS232 User Guide Page | 27
020-1332-00I
Monitoring Setup
Command Description
Numeric Command Code
Operators
Modifiers Operands Example Notes
Standalone Component Command
Firmware Version Active
Functional in Fast Start Standby
Functional in Low Power Standby
CABINET.
POLLING.ENABLE
LED Cabinet
Monitoring
Enable
1532 =? 0=DISABLE=OFF=NO=
FALSE
1=ENABLE=ON=YES=
TRUE
CABINET.POLLING.ENABLE=YES
CABINET.POLLING.ENABLE:@ACK
Gets / sets LED cabinet monitoring
enabling.
Yes 5.1
7.0
1
Yes Yes
CABINET.
POLLING.
INTERVAL
LED Cabinet
Polling Interval
1533 =? 1000 .. 10000 CABINET.POLLING.INTERVAL=2000
CABINET.POLLING.INTERVAL:2000
Gets / sets the cabinet polling interval.
Valid values are between 1000 and 10000.
Longer time intervals reduce chance of
false error reporting.
Yes 5. 1 Ye s Ye s
RESET.ALERTS Alert Reset 2409 ! 0=ALL
1=WEB
2=EMAIL
3=SNMP
RESET.ALERTS(WEB)
RESET.ALERTS(WEB):@ACK
Resets alert settings to the factory default
for the specified UI. If no modifier is
provided, it is treated as all.
No 5.1 Ye s Yes