User’s Manual of GSD-800S / GSD-802S / GSD-802PS
The page includes the following fields:
• Port
Indicate port 1 to port 8.
• Normal
While a port is checked as “Normal”, the port is not joining to any Static Trunk
Group.
• Group
Specify the Joined Trunk Group. There’re maximum 4 trunk groups per system.
With different switch model, the maximum number of ports are as follow:
A port can be assigned to only one Trunk Group.
4.7.2 LACP
Link Aggregation Control Protocol (LACP) - LACP LAG negotiate Aggregated Port links with other LACP ports located on
a different device. If the other device ports are also LACP ports, the devices establish a LAG between them.
The LACP Port Configuration page contains fields for assigning LACP properties to individual ports. The screen in Figure
4-30 appears.
Figure 4-30 LACP Port Configuration
To Next Page
Loading...
