IP-based 8-port Switched Power Manager with 2 Cascaded Ports
IPM-8221
- 14 -
Rear Panel
Cascaded RJ45 input to other PDUs.
Cascaded output with other PDUs through RJ45.
It can connect to 10M/100M Ethernet network. Control and
access PDUs.
External temperature and humidity sensors can be connected
through RJ11 ports.
Overload
Protection
Switch
When the PDU is overloaded, the protector automatically
disconnects the power supply to protect the electrical equipment.
Please plug the power cable into the AC power supply here. This
power input socket is equipped with a switch setting. When the
power cable is connected and the power switch is turned on, the
PDU can be put into working state.