IP-based 8-port Switched Power Manager with 2 Cascaded Ports
IPM-8221
- 39 -
Output Off Setting
When the current exceeds the upper limit, the system automatically disconnects the corresponding port
to eliminate the risk of device overload. You can also set the output power in batches. Treat the same
setup requirements uniformly. After the modification, click the Save button to save the settings.
Figure 4-3-24 Output Off Setting Page Screenshot
Temp & Humidity Warning Setting
The IPM-8221 goes beyond power management by offering dedicated port for ambient Temperature
and Humidity (T/H) sensor (sensor provided with product). When you insert the sensor to Sensor Port
of the PDU. You can obtain the ambient temperature and humidity of the PDU surroundings on the
homepage of the web interface. You also can set the upper and lower limits of temperature and
humidity. When the upper and lower limits of temperature and humidity are exceeded, the system
generates an environmental alarm. After the modification, click the Save button to save the settings.
Figure 4-3-25 Home Page for Temperature and Humidity Screenshot
To Next Page
Loading...
