Gigabit Multi-Homing VPN Security Router User’s Manual
WAN2 or Any). Select from the drop-down menu.
Source IP
Select the source IP range (for example: Any, Single, Range, or preset IP group name).
If Single or Range is selected, please enter a single IP address or an IP address within
a session.
Dest. IP
Select the destination IP range (such as Any, Single, Range, or preset IP group name)
If Single or Range is selected; please enter a single IP address or an IP address within
a session.
Scheduling
Select “Always” to apply the rule on a round-the-clock basis. Select “from”, and the
operation will run according to the defined time.
Apply this rule
Select "Always" to apply the rule on a round-the-clock basis.
If “From” is selected, the activation time is introduced as below
… to …
This control rule has time limitation. The setting method is in 24-hour format, such as
08:00 ~ 18:00 (8 a.m. to 6 p.m.)
Day Control
”Everyday” means this period of time will be under control everyday. If users only
certain days of a week should be under control, users may select the desired days
directly.
Apply
Click “Apply” to save the configuration.
Cancel
Click “Cancel" to leave without making any change.
- 81 -
To Next Page