Planet WGS-4215 Series - LACP Setting; LACP Port Setting

User’s Manual of WGS Managed Series
136
4.4.4 LACP Setting
This page is used to configure the LACP system priority setting. The LACP Setting screens in Figure 4-4-8 & Figure 4-4-9
appear.
Figure 4-4-8 LACP Setting Page Screenshot
The page includes the following fields:
Object Description
• System Priority
A value which is used to identify the active LACP.
The Managed Switch with the lowest value has the highest priority and is
selected as the active LACP peer of the trunk group.
Buttons
: Click to apply changes.
Figure 4-4-9 LACP Information Page Screenshot
The page includes the following fields:
4.4.5 LACP Port Setting
This page is used to configure the LACP port setting. The LACP Port Setting screens in Figure 4-4-10 & Figure 4-4-11 appear.
Figure 4-4-10 LACP Port Setting Page Screenshot
Object Description
• System Priority
Display the current system priority.