Planet WGS-4215 Series - Logging Message

User’s Manual of WGS Managed Series
83
4.2.6.4 Logging Message
The switch log view is provided here. The Log View screens in Figure 4-2-18, Figure 4-2-19 & Figure 4-2-20 appear.
Figure 4-2-18 Log Information Select Page Screenshot
The page includes the following fields:
Object Description
• Target
The target of the log view entry. The following target types are supported:
 Buffered: Target the buffered of the log view.
 File: Target the file of the log view.
• Severity
The severity of the log view entry. The following severity types are supported:
 emerg: Emergency level of the system unstable for log view.
 alert: Alert level of the immediate action needed for log view.
 crit: Critical level of the critical conditions for log view.
 error: Error level of the error conditions for log view.
 warning: Warning level of the warning conditions for log view.
 notice: Notice level of the normal but significant conditions for log view.
 info: Informational level of the informational messages for log view.
 debug: Debug level of the debugging messages for log view.
• Category
The category of the log view includes:
AAA, ACL, CABLE_DIAG, DAI, DHCP_SNOOPING, Dot1X, GVRP,
IGMP_SNOOPING, IPSG, L2, LLDP, Mirror, MLD_SNOOPING, Platform, PM,
Port, PORT_SECURITY, QoS, Rate, SNMP and STP