User’s Manual of WGS Managed Series
The page includes the following fields:
Object Description
• Unknown Multicast
Action
Display the current unknown multicast action status
• Forward Method For IPv4
Display the current IPv4 multicast forward method
• Forward Method For IPv6
Display the current IPv6 multicast forward method
4.7.2 Multicast Throttling Setting
Multicast throttling sets a maximum number of multicast groups that a port can join at the same time. When the maximum
number of groups is reached on a port, the switch can take one of two actions; either “deny” or “replace”. If the action is set to
deny, any new multicast join reports will be dropped. If the action is set to replace, the switch randomly removes an existing
group and replaces it with the new multicast group.
Once you have configured multicast profiles, you can assign them to interfaces on the Managed Switch. Also you can set the
multicast throttling number to limit the number of multicast groups an interface can join at the same time. The MAX Group and
Information screens in Figure 4-7-3 & Figure 4-7-4 appear.
Figure 4-7-3 Max Groups and Action Setting Page Screenshot
To Next Page
Loading...
