Planet WGS-4215 Series - Time Settings; System Time

User’s Manual of WGS Managed Series
74
4.2.5 Time Settings
4.2.5.1 System Time
Configure SNTP on this page. SNTP is an acronym for Simple Network Time Protocol, a network protocol for synchronizing
the clocks of computer systems. You can specify SNTP Servers and set GMT Time zone. The SNTP Configuration screens in
Figure 4-2-8 & Figure 4-2-9 appear.
Figure 4-2-8 SNTP
Setup Page Screenshot
The page includes the following fields:
Object Description
• Enable SNTP
Enabled: Enable SNTP mode operation.
When enabling SNTP mode operation, the agent forwards and transfers
SNTP messages between the clients and the server when they are not
on the same subnet domain.
Disabled: Disable SNTP mode operation.
• Manual Time
To set time manually.
• Year - Select the starting Year.
• Month - Select the starting month.
• Day - Select the starting day.
• Hours - Select the starting hour.
• Minutes - Select the starting minute.
• Seconds - Select the starting seconds.
• Time Zone
Allows to select the time zone according to the current location of switch.