User’s Manual of WGS Managed Series
port, and no new will be learned. Even if the link is physically disconnected
and reconnected on the port (by disconnecting the cable), the port will
remain shut down. There are three ways to re-open the port:
1) Disable and re-enable Limit Control on the port or the switch,
2) Click the Reopen button.
Discard: If Limit + 1 MAC addresses is seen on the port, it will trigger the
action that do not learn the new MAC and drop the package.
Buttons
: Click to apply changes.
Figure 4-13-33 Port Security Status Page Screenshot
The page includes the following fields:
Object Description
• Port Name
The switch port number of the logical port
• Enable State
Display the current per port security status
• L2 Entry Num
Display the current L2 entry number
• Action
Display the current action
To Next Page
Loading...
