Planet WNAP-C3220 User Manual

User Manual of WNAP-C3220
-47-
Click “Add” to setup a Log Server.
Figure 5-33 Add Log Server
The page includes the following fields:
Object Description
 Number of Logs:
Set the number of logs. Default is 200.
 Log Server IP:
Enter the log server IP.
 Log Server Port:
Enter the log server port.
5.7.4 Backup Settings
This section allows you to backup the current settings or to restore the previous settings configured on the
device.
Choose menu “Tools Backup Settings” to back up or restore the configuration of the WNAP-C3220.
Once you have configured the Wireless AP the way you want it, you can save these settings to a configuration
file on your local hard drive that can later be imported to your wireless AP in case the device is restored to
factory default settings.
 Backup & Restore

Planet WNAP-C3220 Specifications

General

Brand	Planet
Model	WNAP-C3220
Category	Extender
Language	English