85 86
Mini100/Mini2
Mini100/Mini2
7. N o w, the name of your printer should be visible in the Printers folder.
Move your mouse cursor to this printer name (icon), and click the right
button of the mouse. Select Properties and then click on the Details tab.
8. Click on the Add Port button. Now, select Other and choose “PS Port” in
the field below. Click on the OK button to continue.
※ The PS Port item will not be shown if the utility is not installed properly.
Please go to Section 3-1 in Chapter 3 and install the program using “Setup
Diskette”.
To Next Page
Loading...