128
Mini100/Mini2
● 5-3-d Using TCP/IP and LPR Port
1. From the Start button, select Settings and then Printers. Double-click on
the Add Printer icon. Now, select My Computer and click on the Next
button.
127
Mini100/Mini2
9. The wizard will ask you whether you wish to print a test page. Select
“Yes” and click on the Finish button. The configuration of your printer is
complete if the test page is printed properly.
※ If the test page does not come out properly, refer to Appendix A for
troubleshooting information.
To Next Page
Loading...